High Opacity Ceiling Paint
A new generation, water-based, 100% acrylic, mostly interior/ silky matt coating. For walls and Ceilings Meets Most of the rigorous requirements of SABS 1586-Grade.3/4
- High opacity, even finish.
- The coating surface is smooth and mat in appearance.
- The slightly matt surface hides surface imperfections.
- Excellent adhesion.
- Low odour.
- Two coats of the product are applied for best results.
- If correctly applied to a properly prepared substrate, the product has a life expectancy of 5-7 years, possibly longer.
SPECIFICATIONS
Application Areas
- Mostly interior use.
- Plaster, hardboard, and fibre cement walls/ceilings.
- Primed metal and wooden substrates.
- Walls, ceilings, fibre cement, fibre, and hard board ceiling panels.
Spreading Rate
6-8M2 per litre.
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 5-7m2 per litre for the first coat and 7-9m2 per litre for subsequent coats and when applied to sealed, previously painted substrates.
Resin Base
Acrylic resin emulsion
Drying Time
Touch dry: ± 30 minutes. Hard dry: 3-4 hours
Film Thickness
35-40 microns per coat
Surface Appearance
Matt
Application Details
Mixing
Always stir well before use with a flat paddle.
Application Method
Brush, roller, or airless spray.
Thinning
This product is ready for use un-thinned. Thinning with water will reduce its hiding power.
Cleaning
Water.
Application
- Stir well before use.
- Two coats of the product are applied for best results.
- With brush, roller or airless spray, apply a generous coat of the product.
- Allow to dry 2-3 hours before recoating.
- Apply a second generous coat of the product.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
- This product is ready for use un-thinned; thinning with water will reduce its hiding power.
- Clean up application equipment with clean tap water.
SPECIFICATIONS
Application Areas
- Mostly interior use.
- Plaster, hardboard, and fibre cement walls/ceilings.
- Primed metal and wooden substrates.
- Walls, ceilings, fibre cement, fibre, and hard board ceiling panels.
Spreading Rate
6-8M2 per litre.
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 5-7m2 per litre for the first coat and 7-9m2 per litre for subsequent coats and when applied to sealed, previously painted substrates.
Resin Base
Acrylic resin emulsion
Drying Time
Touch dry: ± 30 minutes. Hard dry: 3-4 hours
Film Thickness
35-40 microns per coat
Surface Appearance
Matt
Application Details
Mixing
Always stir well before use with a flat paddle.
Application Method
Brush, roller, or airless spray.
Thinning
This product is ready for use un-thinned. Thinning with water will reduce its hiding power.
Cleaning
Water.
Application
- Stir well before use.
- Two coats of the product are applied for best results.
- With brush, roller or airless spray, apply a generous coat of the product.
- Allow to dry 2-3 hours before recoating.
- Apply a second generous coat of the product.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
- This product is ready for use un-thinned; thinning with water will reduce its hiding power.
- Clean up application equipment with clean tap water.