
Water Borne Plaster Primer
Krylic Paints’ pigmented plaster primer is an almost unique waterborne penetrating, bonding, and stabilising primer for interior and exterior use on powdery, friable, and very porous new and weathered substrates such as lime wash, old paint, new friable or porous plaster and fillers. Once the Krylic Paints’ Water Borne Plaster Primer has done its job, these areas can be overcoated with a range of Krylic Paints’ decorative products.
- Unique water borne product. The Primer penetrates deep into the substrate and stabilises it.
- Krylic Waterborne Plaster Primer is based on a resin emulsion and can, therefore, be diluted with water, which makes it a very cost-effective product.
- Krylic Waterborne Plaster Primer has a good alkaline resistance and can be used on objects where aggressive minerals are present.
- Once sealed can be top coated with a wide range of Krylic Paints’ water- based products.
- Excellent penetrating and binding properties.
- Excellent adhesion.
SPECIFICATIONS
Application Areas
- Interior and exterior use.
- New or weathered plaster, hardboard and fibre cement walls.
- Powdery, friable, weathered, previously painted areas.
- Lime wash.
Spreading Rate
6-8m2 per 1 litre
Although the spreading rate will vary with porosity and type of substrate,
Resin Base
Synthetic polymer resin emulsion
Drying Time
Touch dry: ± 1 hour. Hard dry: ± 4-6 hours
Film Thickness
30-40 microns per coat
Surface Appearance
Application Details
Mixing
Always stir well before use with a flat paddle.
Application Method
Brush, roller
Thinning
This product is ready for use un-thinned. Only thin with water if the substrate is extremely porous.
Cleaning
Application equipment clean-up is with potable tap water.
Application
- Stir well before use.
- With brush or roller, apply a generous coat of Krylic Paints’ Water Borne Plaster Primer to the area that needs protecting.
- Allow to dry 4-6 hours before recoating.
- Clean tools immediately after use with potable tap water.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur with in 4-6 hours of application.
SPECIFICATIONS
Application Areas
- Interior and exterior use.
- New or weathered plaster, hardboard and fibre cement walls.
- Powdery, friable, weathered, previously painted areas.
- Lime wash.
Spreading Rate
6-8m2 per 1 litre
Although the spreading rate will vary with porosity and type of substrate,
Resin Base
Synthetic polymer resin emulsion
Drying Time
Touch dry: ± 1 hour. Hard dry: ± 4-6 hours
Film Thickness
30-40 microns per coat
Surface Appearance
Application Details
Mixing
Always stir well before use with a flat paddle.
Application Method
Brush, roller
Thinning
This product is ready for use un-thinned. Only thin with water if the substrate is extremely porous.
Cleaning
Application equipment clean-up is with potable tap water.
Application
- Stir well before use.
- With brush or roller, apply a generous coat of Krylic Paints’ Water Borne Plaster Primer to the area that needs protecting.
- Allow to dry 4-6 hours before recoating.
- Clean tools immediately after use with potable tap water.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur with in 4-6 hours of application.