Home » Products » Hyper Premium Water Proofing

Hyper Premium Water Proofing

Krylic paints HPWP – new generation water based acrylic elastic long life water proofing coating for use with and without a woven membrane for sealing roofs from water penetration

 

  • Krylic paints HPWP is a coating material, which prevents water penetration into the substrate. Applied in several layers and strengthened with a suitable woven material it forms a thick protective membrane for roof sealing.
  • This is available in 6 popular roof shades as well as white.
  • This product is based on a highly flexible and water/weather resistant acrylic resin emulsion.
  • Applied to specification it seals concrete roofs and prevents water penetration.
  • This product remains highly flexible for years even after extended exposure to the environment.
  • Besides its main use on concrete roofs, this product can be successfully applied on galvanized sheeting, roofing felt and fibre cement.
  • This product is ideal for repair work on roofs such as sealing nail heads, leaking flashings and repairing damaged or cracked roofing felt.
  • Can be used on window ledges and to seal parapet wall tops.
  • Highly durable and UV resistant.
  • Highly water resistant.
  • Excellent long term flexibility.
  • Excellent adhesion.
  • Excellent, no mess application properties.
  • Quick drying two coats can be applied in one day.
  • Low odour.
  • Three to four coats of Krylic Paints’ HPWP are used for best results.
  • In white and pastel colours it also has the added benefit of being heat reflective and, therefore, reduces the temperatures of the rooms (especially for metal roofs.

SPECIFICATIONS

Application Areas

  • Interior and exterior.
  • Cement tiles (new or weathered), fibre cement sheeting (new or weathered), plaster, previously painted substrates.
  • Primed metal and wooden substrates.
  • Flat cement/concrete roofs/wall tops.
  • Seal nail heads and roofing bolts.

Spreading Rate

1-2m2 per 1 litre
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 0.5-1m2 per litre for the first coat and 1-2m2 per litre for subsequent coats and for when applied to sealed, previously painted substrates.

Resin Base

Acrylic resin emulsion

Drying Time

Touch dry: ± 1 hour Hard dry: ± 4-6 hours

Film Thickness

80-100 microns per coat

Surface Appearance

Slightly silky matt

Application Details

Mixing

Always stir well before use with a flat paddle.

Application Method

Brush and roller

Thinning

This product is ready for use un-thinned. Thinning with water will reduce its hiding power.

Cleaning

Application equipment clean-up is with clean tap water.

Application

  • Stir well before use.
  • With brush or roller, apply a generous/thick coat of Krylic Paints HPWP to the area that needs protecting in small manageable sections.
  • Firmly and evenly press a layer of woven fabric waterproofing membrane such as Biddim into the wet layer of Krylic Paints’ HPWP
  • Allow to dry 4-6 hours before recoating.
  • Apply a second, third and possibly a fourth generous coat, waiting 4-6 hours between coats, until the membrane is totally saturated and the surface has an even and very noticeable high sheen.
  • This product is ready for use un-thinned. Thinning with water will reduce its hiding power and effectiveness
  • Three to four coats of this product are used for best results.
  • Application equipment clean-up is with clean tap water.
  • Do not apply before 09:00am and after 16:00pm in the winter.
  • Do not apply exterior if it looks like rain will occur within 4-6 hours of application.

SPECIFICATIONS

Application Areas

  • Interior and exterior.
  • Cement tiles (new or weathered), fibre cement sheeting (new or weathered), plaster, previously painted substrates.
  • Primed metal and wooden substrates.
  • Flat cement/concrete roofs/wall tops.
  • Seal nail heads and roofing bolts.

Spreading Rate

1-2m2 per 1 litre
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 0.5-1m2 per litre for the first coat and 1-2m2 per litre for subsequent coats and for when applied to sealed, previously painted substrates.

Resin Base

Acrylic resin emulsion

Drying Time

Touch dry: ± 1 hour Hard dry: ± 4-6 hours

Film Thickness

80-100 microns per coat

Surface Appearance

Slightly silky matt

Application Details

Mixing

Always stir well before use with a flat paddle.

Application Method

Brush and roller

Thinning

This product is ready for use un-thinned. Thinning with water will reduce its hiding power.

Cleaning

Application equipment clean-up is with clean tap water.

Application

  • Stir well before use.
  • With brush or roller, apply a generous/thick coat of Krylic Paints HPWP to the area that needs protecting in small manageable sections.
  • Firmly and evenly press a layer of woven fabric waterproofing membrane such as Biddim into the wet layer of Krylic Paints’ HPWP
  • Allow to dry 4-6 hours before recoating.
  • Apply a second, third and possibly a fourth generous coat, waiting 4-6 hours between coats, until the membrane is totally saturated and the surface has an even and very noticeable high sheen.
  • This product is ready for use un-thinned. Thinning with water will reduce its hiding power and effectiveness
  • Three to four coats of this product are used for best results.
  • Application equipment clean-up is with clean tap water.
  • Do not apply before 09:00am and after 16:00pm in the winter.
  • Do not apply exterior if it looks like rain will occur within 4-6 hours of application.