
10-Year EXT-INT WB Enamel
A new generation, water-based, 100% acrylic, long-life, Interior/ Exterior High Sheen coating. Meets Most of the rigorous requirements of SABS 1586-Grade.1
- Highly durable and water resistant.
- The coating surface is smooth and high sheen in appearance.
- Highly washable – comfortably meets the requirements of the very harsh SABS and ASTMS scrubs resistant test methods.
- The high sheen surface prevents dirt pickup and makes it easy to clean.
- Can be cleaned with any household detergent and by scrubbing if required.
- Excellent adhesion.
- Low odour.
- Two coats of the product are applied for best results.
- If correctly applied to a properly prepared substrate, the product has a life expectancy of 10 years, possibly longer.
SPECIFICATIONS
Application Areas
- Exterior or interior use.
- High traffic areas that need a highly washable and durable coating in a wide range of colours.
- Plaster, hardboard and fibre cement walls.
- Primed metal and wooden substrates.
- Window/door frames, skirting boards, fibre cement, galvanised gutters and down pipes, PVC pipes, fibre and hard board panels.
Spreading Rate
8-10 square metres per litre.
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 7-9 square metres per litre for the first coat and 9-11 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
Resin Base
Drying Time
Film Thickness
Surface Appearance
Application Details
Mixing
Application Method
Thinning
Cleaning
Application
- Stir well before use.
- Two coats of the product are applied for best results.
- With brush, Mohair roller or airless spray, apply a generous coat of the product.
- Allow to dry 5-6 hours before recoating.
- Apply a second generous coat of the Product.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
- This product is ready for use un-thinned. Thinning with water will reduce its hiding power.
- Clean up application equipment with clean tap water.
SPECIFICATIONS
Application Areas
- Exterior or interior use.
- High traffic areas that need a highly washable and durable coating in a wide range of colours.
- Plaster, hardboard and fibre cement walls.
- Primed metal and wooden substrates.
- Window/door frames, skirting boards, fibre cement, galvanised gutters and down pipes, PVC pipes, fibre and hard board panels.
Spreading Rate
8-10 square metres per litre.
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 7-9 square metres per litre for the first coat and 9-11 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
Resin Base
Drying Time
Film Thickness
Surface Appearance
Application Details
Mixing
Application Method
Thinning
Cleaning
Application
- Stir well before use.
- Two coats of the product are applied for best results.
- With brush, Mohair roller or airless spray, apply a generous coat of the product.
- Allow to dry 5-6 hours before recoating.
- Apply a second generous coat of the Product.
- Do not apply before 09:00am and after 16:00pm in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
- This product is ready for use un-thinned. Thinning with water will reduce its hiding power.
- Clean up application equipment with clean tap water.